Posts mit dem Label Vintage Halloween Paper werden angezeigt. Alle Posts anzeigen
Posts mit dem Label Vintage Halloween Paper werden angezeigt. Alle Posts anzeigen

Sonntag, 23. Oktober 2022

Whimsy Stamps | Vintage Halloween Paper

 Welcome to my blog.  It is time for a new inspiration.
Herzlich willkommen auf meinen Blog. Es ist Zeit für eine neue Inspiration.


 

How I made this card?

First I cut the vintage paper to fit the shaker element. After I did this, I taped the paper to 3 sides and then filled in the confetti. After that I closed the Shaker element and glued it to an A2 (US size) card on the front. Now I still decorated this, a background with trees and in addition a cute image with matching sentiment. I hope you like the idea. 

Wie habe ich diese Karte gemacht?

Zuerst habe ich das Vintage Papier zugeschnitten, damit es passt für das Shaker Element. Nachdem ich dies geschafft habe, habe ich das Papier an 3 Seiten angeklebt und dann die Confetti eingefüllt. Danach habe ich das Shaker Element geschlossen und auf eine A2 (US Format) Karte auf die Front geklebt. Nun habe ich diese noch dekoriert, einen Hintergrund mit Bäumen und dazu noch ein niedliches Image mit passenden Sentiment. Ich hoffe, Du magst die Idee. 




Products | Produkte

I link here all products, which I have used.
Ich verlinke hier alle Produkte, welche ich gebraucht habe.








Thanks for visit my blog and for your lovely comment. 
Danke vielmals, dass Du mich auf dem Blog besucht hast und für Deinen lieben Kommentar. 


Montag, 3. Oktober 2022

Whimsy Stamps | Vintage Halloween Paper

 

Welcome to my blog.  It is time for a new inspiration.
Herzlich willkommen auf meinen Blog. Es ist Zeit für eine neue Inspiration.


How I made this card?

First I took a sheet of A4 from the black cardstock. I took the Haunted Graveyard Boder punch and measured out the house, since I want to show this in the background. The trees were to be the intermediate pieces. I opted for a centimeter version this time. Feel free to use this for inch measurements as well. I refrain from a calculation, because it is not possible to convert the data one to one. 

The prepared black cardstock is 12.8 cm wide and 25cm long. Now take the long side and place it in a folding board for folding. Then fold at 8cm | 12cm | 20cm | 24cm. There will be one centimeter of glue edge left. Now turn this piece of cardstock so that the glue edge line is on top and fold at 8cm. Now the base is almost ready. Cut the fold edges on the long side to the single fold edge (this is the longer side, the other is only 4.8cm long). Note the photo when doing this. On the photo you will find a blue area which is removed, this is with me at a good 5.5cm less, so the side flaps and the front flap look better. 

Fold the side pieces and the front piece down and place the Boder punch on the piece that is still standing (background) so that the house can be die cut on top of it. If there is a hard edge at the edge, you can cut it a little round, then it looks like the house is standing on a mountain. I measured the intermediate parts so that they are 8cm in the middle and one centimeter on each side, so they are 10 cm long. I estimated the height. In doing so, I measured the tree that I want to die cut and then added 2-3 cm to the bottom so that I can paste this into the card. Now die cut, cut off the rest and glue it into the card. 

I added a few more ghosts to this card, as I find the Boo spell fitting. The box still embellished with patterned paper and ready. 

Do you still have questions or is still something unclear formulated? I'm here for you, just write in the comments and I answer as soon as possible. 



Wie habe ich diese Karte gemacht?

Zuerst nahm ich ein Blatt A4 aus dem schwarzen Cardstock. Ich nahm die Stanze Haunted Graveyard Boder und messe das Haus aus, da ich dieses im Hintergrund zeigen möchte. Die Bäume sollten die Zwischenteile bilden. Ich habe mich dieses Mal für eine Version in Zentimetern entschieden. Gerne könnt ihr diese auch für Zollmasse verwenden. Ich verzichte auf eine Umrechnung, da diese nicht eins zu eins umsetzbar ist.  

Der vorbereitete schwarze Cardstock ist 12.8 cm breit und 25cm lang. Nun nimmst Du die lange Seite und legst sie zum Falzen in ein Falzbrett. Falze dann bei 8 cm | 12cm | 20cm | 24cm. Es bleibt ein Zentimeter Kleberand übrig. Nun drehe dieses Stück Cardstock so, dass der Kleberand zuoberst ist und falze bei 8cm. Nun ist die Basis schon fast fertig. Schneide die Falzränder auf der langen Seite bis zur einzelnen Falzkante ein (dies ist die längere Seite, die andere ist nur 4.8 cm lang). Beachte dabei das Foto. Auf dem Foto findest Du einen blauen Bereich, welche entfernt wird, dies ist bei mir bei gut 5.5cm weniger, so sehen die Seitenklappen und die Frontklappe besser aus. 

Falze die Seitenteile und das Frontteil nach unten und lege die Boder Stanze auf das noch stehende Teil (Hintergrund), so dass das Haus darauf gestanzt werden kann. Falls es eine harte Kante am Rand gibt, kann man diese ein wenig rund abschneiden, dann wirkt es, als steht das Haus auf einen Berg. Die Zwischeteile habe ich so ausgemessen, dass diese in der Mitte 8cm sind und je einen Zentimenter an der Seite, also 10 cm lang sind. Die Höhe habe ich geschätzt. Dabei habe ich den Baum, den ich stanzen möchte gemessen und dann noch 2-3 cm dazugerechnet nach unten hinzugerechnet, damit ich dies in der Karte einkleben kann. Nun ausstanzen, Rest abschneiden und in die Karte einkleben. 

Ich habe noch ein paar Geister auf diese Karte gebracht, da ich den Spruch Boo passend finde. Die Box noch mit gemusterten Papier verschönert und fertig. 

Hast du noch Fragen oder ist noch etwas unklar formuliert? Ich bin gerne für Dich da, schreib einfach in die Kommentare und ich antworte so schnell als möglich. 


Products | Produkte

I link here all products, which I have used.
Ich verlinke hier alle Produkte, welche ich gebraucht habe.








Thanks for visit my blog and for your lovely comment. 
Danke vielmals, dass Du mich auf dem Blog besucht hast und für Deinen lieben Kommentar. 


Freitag, 23. September 2022

Whimsy Stamps | FaDoodle Fall

 

Welcome to my blog.  It is time for a new inspiration.
Herzlich willkommen auf meinen Blog. Es ist Zeit für eine neue Inspiration.


 

How I made this card?

At first......



Wie habe ich diese Karte gemacht?

Manchmal lasse ich mich im Internet von einem Sketch inspirieren. Ich konnte leider die Webseite nicht mehr erreichen, also zeige ich euch das Bild des Sketches, welches ich genutzt habe. 
Wenn ich Sketche benutze, kommt oft auch gemustertes Papier. Hierbei achte ich, was ich stempeln möchte und welche Farbe am besten passt. Dieses Mal habe ich mich für herbstliche Farben entschieden. 
Anstatt Band zu nehmen, habe ich den blauen Streifen aus Papier gewerkelt und mit einem Copic Farbe aufgetragen, passend zu den Confetties. Nun zum Image, ich habe erneut die Masking Technik angewandt, um die Schubkarre abzudecken und zu befüllen, ebenso bin ich bei den Kürbissen verfahren. Nun dieser kleine Gnome hat viel Vorrat oder verteilt er diese gerade? Nun das Stempelset eignet sich sehr gut, um die Sentiments zusammenzufügen, wie ich es hier gemacht habe, aus dem Englischen übersetzt "so dankbar". Ich hoffe ich konnte Euch dieses Mal wieder ein wenig inspirieren. 



Products | Produkte

I link here all products, which I have used.
Ich verlinke hier alle Produkte, welche ich gebraucht habe.











Thanks for visit my blog and for your lovely comment. 
Danke vielmals, dass Du mich auf dem Blog besucht hast und für Deinen lieben Kommentar. 


Dienstag, 13. September 2022

Whimsy Stamps | Gnome so Thankful

   Welcome to my blog.  It is time for a new inspiration.
Herzlich willkommen auf meinen Blog. Es ist Zeit für eine neue Inspiration.


How I made this card?

 I show only a small scene on the card today, otherwise I let the card white. I use here the village of mushrooms and with the stencil I still bring the clouds on the picture. With the patterned paper I set a frame above and below, then I cut out the colored gnome and put a sentiment on the card, as well as a few rhinestones. 

Wie habe ich diese Karte gemacht?

Ich zeige heute auf der Karte nur eine kleine Szene, sonst lasse ich die Karte weiss. Ich nutze hier das Dorf aus Pilzen und mit der Schablone bringe ich noch die Wolken auf das Bild. Mit dem gemusterten Papier setze ich einen Rahmen oben und unten, danach schneide ich den colorierten Gnome aus und setze noch ein Sentiment auf die Karte, sowie ein paar Rhinestone.  

Products | Produkte

I link here all products, which I have used.
Ich verlinke hier alle Produkte, welche ich gebraucht habe.







Thanks for visit my blog and for your lovely comment. 
Danke vielmals, dass Du mich auf dem Blog besucht hast und für Deinen lieben Kommentar.